HELP:   Request a Label Quote from The John Henry Packaging Group

Technical questions and assistance:

• Your JH Packaging representative can assist you.
• New customers may call our Customer Care department at (800) 748-0216 Ext. 2382.

To Print the HELP page: (Internet Explorer)

• Right-click the Help page.
• Select (click on) PRINT.
• Under PRINT RANGE, select (click on) ALL.
• Click OK.

Mandatory identifying information:

• Company Name
• Your Name
• Your E-mail address. You will receive a confirming E-mail showing all information in your request, and the unique Quote Number assigned to this transaction.   General E-mail format:  name@domain.com

Optional information -- For best processing results, fill in as much information as possible.

• Job Type:  Select (click on) only one type of job. Clicking a radio button clears any previously clicked button. (Default=LABEL)
  
  
• Job Description:  Enter a brief description of your job. Any number of lines may be entered; text wraps automatically.
  
  
• Quote needed by:  Enter the date by which you need the quote.
  
  
• Quantity:  Enter up to 5 quantities and price points. Use commas as needed. If you have additional quantities, enter them in Special Instructions at the bottom of the form.
  
  
• Sample Label:  Use the diagram of a sample label to determine how to measure Width, Length, Down the label, and Across the label.
  
  
• Size:  Enter Label width, length and unit of measure. (Default=INCH)
  
  
• Alternate Size:  Optionally, enter Label width, length and unit of measure. (Default=INCH)
  
  
• Use Closest JHP die?  Select (click on) either YES or NO. If you select YES, optionally fill in the NOT TO EXCEED box with a numeric value and a unit of measure (inches or mm). (Default=YES)
  
  
• Space between shapes:  Enter SPACE ACROSS ROLL and SPACE DOWN ROLL as numeric values.
  
  
• Shape:  Select (click on) only one type of shape. If you selected Round Corner Rectangle, also enter the Corner Radius. If you selected Special Shape, also select a method of sending the Die Line drawing (below). (Default=DIE CUT / ROUND CORNER RECTANGLE)
  Method of Sending a Special Shape Die: Die Line drawings may be faxed to the telephone number indicated, mailed to the address indicated, or uploaded via the Internet. Indicate your method by selecting (clicking on) only one option. Clicking on a radio button clears any previously clicked button. (Default=FAXED)
  If you wish to upload your file:
  • Only ONE Special Shape Die file may be uploaded per Quote Request. If you have multiple Die files, first create ONE zip file containing all files to be uploaded.
  • Click the UPLOAD FILE radio button.
  • Upload the file:
    • Press the BROWSE button.
    • Select your file from the dialog box.
    • Click the OPEN button.
  • NOTE: Larger files take longer to upload, especially at slow transmission speeds.
  
  
• Options:  Select (click on) as many options as you like.
  
  
• Face Stock:  Select (click on) as many options as you like:
  • Computer Imprintable: Select (click on) only one option from the dropdown list. If your choice has an asterisk (*) in front of the printer name, enter the printer type (if known) in the text box below. Clicking on a list entry clears any previously clicked entry. To view all selections on the list, click the arrow to the right of "(select one)."
  • Other Stock: If you have an additional stock choice not listed above, enter your own description in the text box at right.
  • Brand/Description: If known, enter specific Stock information, such as weight, color, finish, brand name, manufacturer, etc. Enter any number of lines; text wraps automatically.
  
  
• Adhesives:  Select (click on) only one option. If you select any adhesive (other than NONE), specify the specific adhesive in the appropriate text box, if known. (Default=PERMANENT)
  
  
• Special Applications:  Enter specific information about the surface and/or environmental conditions under which the labels will be used. Enter any number of lines; text wraps automatically.
  
  
• Prep Work:  To indicate how prep work will be furnished to the JH Packaging Group, select (click on) only one Prep Work option. Clicking on a radio button clears any previously clicked button. If you have Artwork to send with the quote, select the appropriate radio button. Prep Work/Artwork files may be faxed to the telephone number indicated, mailed to the address indicated, or uploaded via the Internet. (Default=DISK FURNISHED)
  If you wish to upload your file:
  • Only ONE Prep/Artwork file may be uploaded per Quote Request. If you have multiple files, first create ONE zip file containing all files to be uploaded.
  • Click the UPLOAD FILE radio button.
  • Upload the file:
    • Press the BROWSE button.
    • Select your file from the dialog box.
    • Click the OPEN button.
  • NOTE: Larger files take longer to upload, especially at slow transmission speeds.
  
  
• Proofs Required:  Indicate type and number of proofs you will require. If your choice is not on the list, select OTHER and enter your own description in the box to the right. If NUMBER OF PROOFS is left blank, zero is assumed. (Defaults: Proofs=NONE, Number of Proofs=ZERO)
  
  
• Press Check by Customer:  Indicate whether you wish to perform a press check before printing, by selecting (clicking on) either YES or NO. (Default=NO)
  
  
• Inks/Plates:  Enter relevant information. Check as many special printing boxes as needed.
  
  
• Bar Codes:  If you require bar codes, select (click on) how your bar codes are to be furnished. If JH PACKAGING TO SUPPLY is selected, enter a numeric value in QUANTITY (the number of bar codes to be used). (Defaults: Bar Codes=NONE, Quantity=ZERO)
  
  
• Finishing/Packaging:  Select (click on) as many packaging options as you wish. Enter any related information. If your choice is not listed, select OTHER and enter your own description in the box to the right.
  
  
• Core:  Enter Core information.
  • Size: Select (click on) the appropriate size. If your choice is not listed, select OTHER and enter your own description of Core Size.
  • Method of Application: Select (click on) an application method. If your choice is not listed, click OTHER and enter your own Method description.
  • Number of Labels/Roll: Enter a numeric value.
  • Maximum Outer Diameter of roll: Enter a numeric value.
  
  
• Unwind Direction:  Select the orientation of labels as they come off the roll. (See the graphics illustrating the four directional options.) If labels are to be machine-applied, you must select an unwind direction; otherwise selection is optional. If the direction of the labels as they come off the roll is unimportant, select (click on) "Direction not relevant." (Default=DIRECTION NOT RELEVANT)
  
  
• Shipping Destination:  Indicate FOB Lansing, MI or fill in City, State and ZipCode. (Default=FOB LANSING, MI)
  
  
• Special Instructions:  Enter any instructions or comments, additional Price Points, etc. Any number of lines may be entered; text wraps automatically.
  
  
• Reset:  If you wish to start over (prior to submitting the page), press the RESET button to clear all fields and restore default values.
  
  
• Submit Form:  Press the SUBMIT button to transmit the request.

Top